锯齿扁管内沸腾换热试验

建立以等热流密度方式进行试验件加热的沸腾换热试验系统,分别对当量直径为1.28mm和1.59mm锯齿扁管内R134a工质的沸腾换热特性进行研究,试验参数范围:制冷剂质量流率为68.5~305.5kg/(m2·s),工作饱和压力为0.27~0.46 MPa,加热热流密度为9~42kW/m2。试验结果表明:相同结构的通道,当量直径小换热能力更强;热流密度和饱和压力对沸腾换热的影响与一个干度值有关。当干度小于此值时,沸腾换热系数会随着热流密度及饱和压力增大而增大;而当干度大于此值时,沸腾换热系数随着干度增大而急剧下降,热流密度和饱和压力对换热的影响较小;该干度值会随着热流密度或饱和压力增大而逐渐变小。质量流率对沸腾换热的影响与热流密度有关,随着热流密度增大,质量流率的影响趋向大干度区域。通过分析各参数对沸腾换热的影响,建立了一个预测试验工况下微小尺寸锯齿扁管的沸腾换热系数计算经验公式。     

原子钟调相白噪声降噪方法

原子钟的五种噪声反映了它在一定时间间隔内的性能。当取样间隔小于1h，原子钟主要表现为调相白噪声。在地方协调时UTC（NTSC）的实时监控中，不仅要求参考原子时（RTA，用于地方协调时控制的参考）具有很高的长期稳定度，而且要求其短期稳定度亦很高。影响RTA短期稳定度的主要是个台原子钟的调相白噪声。首先讨论了确定原子钟短期噪声的方法，进而利用小波分析方法研究了原子钟凋相白噪声分离与降噪的方法。     

小区域交通流协调控制技术及应用

提出了一种在线式小区域交通信号协调控制策略,其可行性已在实际应用得到证实。通过设置在交叉口处的车辆检测器不断采集车辆信息,实时调整关联路口间的相位差,并通过合理的交通配时,实现主干道双向绿波控制,从而有效地提升道路的通行能力。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

前飞速度和升力偏置量对共轴刚性旋翼气动特性影响分析

共轴刚性旋翼前飞状态的气动特性主要由工况环境中的来流速度、密度和桨叶的翼型配置、弦长分布和扭转分布等气动布局参数决定。气动布局参数的综合影响决定了共轴刚性旋翼的的升力偏置量。了解前飞速度和升力偏置量对前飞性能的影响规律有利于设计更适合于高速飞行的共轴刚性旋翼。因此,本文通过求解可压雷诺平均N-S(Reynolds-averaged Navier-Stokes,RANS)方程对4 m直径的由两副2片矩形桨叶旋翼构成的共轴刚性旋翼模型的前飞流场进行了数值模拟,获得了不同前进比下的气动力并对不同升力偏置量下的旋翼性能进行了对比。数值模拟结果表明,随前进比增大,桨叶展向拉力分布更加趋于合理,拉力中心向桨叶中段移动,可以充分给桨尖卸载;旋翼升力主要由前行侧桨叶提供,升力偏置量过大容易产生激波诱导失速,不利于高速前飞。     

Statistical characteristics of low latitude Pc4s: Influence of solar wind and IMF parameters

Pc4 signatures for the year 2013, extracted from geomagnetic north–south and east–west components of induction coil magnetometer (LEMI 30) from low latitude station Desalpar (DSP), operated by Institute of Seismological Research (ISR), India have been investigated vis-à-vis the prevalent interplanetary parameters (IMF) as well as the geomagnetic activity indices. A clear dominance of Pc4-5 (467 events) over Pc3 (17 events) is observed. Local time variation of Pc4 shows a peak in the noon sector in both X and Y components. Our investigations show that the dominant peak frequency is 10 mHz at low latitude region. Correlations with solar wind and IMF parameters illustrate highest occurrence of Pc4 for a solar wind speed of 300–400 km/s and average IMF B field of 3–6 nT. The amplitude of Pc4s at DSP shows an increase with increasing solar wind speed, plasma density, solar wind dynamic pressure and average B field which is also reflected in the trend of frequency variation of these pulsations. We report that IMF clock angle at low latitude does not have influence on Pc4 occurrence. Based on the characteristics of these events, detected in latitudinally distributed stations from low and mid-latitudes from northern and southern hemisphere, we infer that modes were compressional, which could be driven by K-H instability or solar wind dynamic pressure, as compressional modes can propagate to low latitude with little attenuation.     

GNSS驯服芯片级原子钟方法研究CSCD

芯片级原子钟是一种体积小且功耗低的高精度时钟源,具有广泛的用途。针对这一特点,设计了基于GNSS的芯片级原子钟驾驭算法。以GNSS系统时作为参考,测量芯片级原子钟与GNSS系统时间的钟差,并对芯片级原子钟进行钟差建模,获取其特征参数。通过乒乓法计算出钟驾驭调整量,对芯片级原子钟进行控制,最终将芯片级原子钟驾驭到GNSS系统时间上。经过实验验证,在驾驭时间常数为100s的情况下,芯片级原子钟与GNSS系统时间的时钟同步误差在-7.5~7.5ns之间;1h频率准确度为5.8×10-13;平均时间为10000s时的频率稳定度为3×10-13。     

基于加权鉴别函数的二进制偏移载波信号跟踪方法

在移除二进制偏移载波（Binary Offset Carrier,BOC）信号跟踪模糊的同时,为了保持BOC信号高的码跟踪精度,提出基于加权鉴别函数（Weighted Discriminator Function,WDF）的BOC信号无模糊跟踪方法。WDF使用非相干超前减滞后功率（Noncoherent Early Minus Late Power,NELP）鉴别器和子载波相位消除（Sub Carrier Phase Cancellation technique,SCPC）鉴别器,生成无误锁点的鉴别函数实现BOC信号跟踪。针对BOC(10,5)信号,仿真结果表明,相比于SCPC、基于伪相关函数的无模糊延迟锁定环（Pseudo correlation function based Unambiguous Delay Lock Loop,PUDLL）方法和对称脉冲模糊移除（Symmetrical Pulse Ambiguity Removing,SPAR）方法,所提WDF方法在码跟踪误差方面分别改善了2.5dB、5.5dB与8.3dB,多径误差分别降为60.4%、32.8%与38.0%。因此,WDF是一种有效的、高性能的BOC信号无模糊跟踪方法。     

一种阵列天线逐通道相关在线标校法

由于发送端和接收端时钟的不一致性,导致低信噪比下阵列天线卫星移动通信的逐通道相关标校有很大的难度。在考虑易实现性和简易性基础上,提出了一种可以解决低信噪比下通道校正的多周期长时累积方法。该校准信号为由地面标校站产生的BPSK调制扩频信号,可以减少卫星设计的复杂度,且在不中断用户数据传输的基础上实现在线标校。该方法通过对接收信号打标、速率匹配等措施来解决收发时钟不一致导致的码偏和频偏问题。研究结果可以为阵列天线卫星通信技术提供支持。     

一种基于量化力矩的静密封面缺陷补偿方法

在某次阀门静密封连接处漏气问题归零过程中,提出了一种基于量化力矩方法,用来弥补静密封面缺陷,以提高产品的静密封可靠性。